Return To Wikco's Home Page

Wikco Brand Motorcycle Tire Changer Model # MCII0.200
Price is $524.95 Plus Shipping.

Special Offer: Motorcycle Wheel Balancer Price $219.95 When Purchased With The MC110.200 Motorcycle Tire Changer. 

Motorcycle Wheel Balance
Click Picture To View The BMC112 Balancer Page

Heavy Duty Wheel Clamp

Demounting/Mounting Tire Bar

Replacable Protective Ends

Bead Breaker Shoe

Bead Breaker Channel

    

Features/Specifications:

• The MC110.200 Motorcycle Tire Changer lets you change tires on motorcycle, dirt bike, mini-bike, and ATV wheels with rim diameters from 8 inches up through 21 inches.
• The motorcycle tire changer is complete with bead breaker and mount/demount bar.
• The MC110.200 comes with our custom wheel bar for motorcycle and other wheels with aluminum, chrome, or painted rims.
• The custom wheel bar tire tool prevents scratching and gouging of these wheels. The delrin plastic inserts on the bars will last for many uses, but can be easily replaced when needed.
• The MC110.200 is also equipped with the newly designed Heavy Duty Wheel Clamps that have replaceable Heavy Duty Plastic Protective Ends that prevent scratching and gouging of the wheels. Plastic protection has also been added to the newly designed bead breaker shoe, and a heavy piece of rubber has been add to the bead breaker channel. (see above pictures)
• The rim clamps are tall enough that brake disk(s), belt drive pulley, or sprocket can be left bolted to the rim when changing the tire.

Height: From floor to where motorcycle rim sits - 37 inches.

Comes with 2 different center posts: 9/16 inch and 7/16 inch diameter to fit most wheels with a center hole through the rim.

The MC 110.200 is reasonably priced, made in the USA, and has a 2 year warranty against defects in material and workmanship.

Model MC110.200 Motorcycle Tire Changer:

Parts Drawing 

MC110.200 Base Unit

MC110.200 Vise

                                                                       

Model # 110.HA  2 Inch Receiver Hitch Attachment

Price Is $79.95 Plus Shipping

The Model # 110.HA Hitch Attachment allows you to mount any of the Wikco brand tire changers to your car or truck 2 inch receiver hitch. This includes the model # MC110.100 motorcycle tire changer, model # MC110.200 motorcycle tire changer, and the model # STC100.103 manual tire changer with the small tire accessory. One end of the attachment bolts to the tire changer using the 2 U-bolts and the 2 V-shaped clamps (included). The other end inserts into the 2 inch receiver hitch on your vehicle. The hitch attachment gives you approximately 45 inches of length from the end of the receiver hitch, and is adjustable several inches up or down. 

   

This Accessory is designed to fit the MC110.200 Motorcycle Tire Changer.

Use this accessory to change tires on car, pickup, and trailer tires, or any other tire with a center hole in the wheel from 1 3/4" to 4" and wheel sizes from 8" to 19" , with a maximum wheel width not to exceed 12".

Used by power equipment shops, auto shops, golf courses, landscape companies, tire shops, schools, as well as private individuals.

Over the years we have sold thousands of this same attachment with very positive feedback.

Comes complete with screw on hold down cap, and spider to hold the wheel down tight. Also comes with our popular all steel, large tire mount / demount tire bar 

(the tire bar alone is a $79.00 value).

Price for the 4 piece kit is $175.95 Plus Shipping.

Model # STC103c Small Tire Changing Accessory

This Accessory is designed to fit the MC110.200 Motorcycle Tire Changer.

Use this accessory to change tires on those hard to hold small wheels  - 4" to 10" with a center hole or bearing of 3/4" such as on power equipment, mowers, golf carts, ATVs,  and go-carts.

Used by power equipment shops. golf courses, landscape companies, tire shops, schools, as well as private individuals.

Over the years we have sold thousands of this same attachment with very positive feedback.

Comes complete with screw on hold down cap, and our popular small tire mount / demount tire bar.

Price for the 3 piece kit is $149.95 Plus Shipping.

Model #109 ATV Bead Breaker 

The 109ATV Bead Breaker Shoe also has a lever arm that attaches so you can keep the bead breaker shoe tightly against the rim. Ideal for breaking the bead on ATV wheels, also the Bead Breaker Shoe works great on motorcycle wheels, now included is a protective plastic insert that will protect the wheels from scratching, and gouging. This item and all Wikco Industries tire changing tools and accessories are designed to fit only Wikco brand products, and are not recommended for use with other brand of tire changers.

Price is $58.95 Plus Shipping.